FleetIQ Pro
Long-range Wi-Fi, sensors and Subchapter M alarms.
Everything in FleetIQ, plus long-range Wi-Fi HaLow: where there is no cell signal it reports through a StationIQ base station. Also dual-band GPS and an expansion bus for engine and sensor modules. Doubles as your Subchapter M alarm and monitoring system.
FleetIQ Pro10–28 V
6.9 × 4.6 × 2.1 in. Drag to turn.
What it does
- Everything in FleetIQ
- Long-range Wi-Fi HaLow to StationIQ base stations
- Stays reporting in cell dead zones through StationIQ and Starlink
- Dual-band L1/L5 GPS, ≤ 1.5 m
- Updates as often as every 2 seconds
- Modbus, CANbus and Ethernet expansion modules
- Subchapter M alarm and monitoring
Pricing depends on fleet size and update rate. Talk to us for a quote.
Sample readings in the format the app shows.
Add engine and sensor connections
Add modules when you buy the tracker, or unlock them later.
Modbus module
2 channels, up to 64 devices each
CANbus module
4 channels, one engine each
Ethernet expansion
LAN and WAN
Spec sheet
| Dimensions | 6.9 × 4.6 × 2.1 in |
|---|---|
| Weight | 1.6 lb |
| Ingress | IP67 / IP68, NEMA 4X and 6P |
| Mounting | Built-in flange |
| Power input | 10–28 V DC |
| Links | LTE-M / NB-IoT, long-range Wi-Fi HaLow |
| Position accuracy | ≤ 1.5 m, L1/L5 |
| Update rate | 2 s to 60 s, configurable (60 s standard) |
| Sensor inputs | 2× Modbus RTU (64 devices each), 4× CAN J1939, Ethernet |
| On-board storage | At least 60 days at the fastest report rate |
| Warranty | 1 year |
Paperwork
From the box to the map
Mount
Bolt it to the deck or a bulkhead through the built-in mounting flange.
Power
Connect 10–28 V DC from the barge or a battery box.
Connect engines and sensors
Wire J1939 engine data and your sensors to the Modbus, CANbus or Ethernet inputs. Readings and alarms show up in the app.
Done
It registers to your account the first time it reports.
Spec FleetIQ Pro for your fleet.
Tell us about your barges and boats and we will put together an exact quote.